Doug Adams - Publications & Conferences

Publications

1. Mares, J., Miller, J., Rhoads, J., Son, S., Groven, L., Sharp, N., and Adams, D., “Thermal and Mechanical Response of PBX 9501, PBS 9501, and 900-21 under High-Frequency Mechanical Excitation,” 2013, Journal of Applied Physics, 113, 084904.

2. Yang, C., and Adams, D. E., “Identification of Multiple Damages in a Structure using Embedded Sensitivity Function and Optimization Techniques,” 2012, Transactions on Control and Mechanical Systems, accepted.

3. Meyer, A., and Adams, D. E., “Damage identification of ground vehicle through passive probing of suspension damping”, 2012, Experimental Mechanics, accepted.

4. DiPetta, T., Koester, D., Doherty, P., Fisher, K., and Adams, D. E., “Study of an Instrumented Diagnostic Cleat for Diagnosing Vehicle Mechanical Faults using Off-Board Dynamic Response Measurements”, 2012, Journal of Condition Monitoring and Diagnostic Engineering Management, in print.

5. Butner, C., Adams, D., and Foley, J., “Investigation of the Effects of Bolt Preload on the Dynamic Response of a Bolted Interface,” 2012, ASME J. Appl. Mech. 80(1), 011016.

6. Gupta, L., Brouwer, M., Sadeghi, F., Peroulis, D., and Adams, D., “High Temperature Dynamic Viscosity Sensor for Engine Oil Applications,” 2012, Sensors & Actuators: A. Physical, Vol. 173(1), pp. 102-107.

7. Zwink, B., and Adams, D. E., “Nondestructive Evaluation of Composite Material Damage using Vibration Reciprocity Measurements”, 2012, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 134, No. 4, 041013.

8. Mahulkar, V., and Adams, D. E., “Derivative Free Filtering in Hydraulic Systems for Fault Identification”, 2011, Control Engineering Practice, Vol. 19, Issue 7, pp. 649-657.

9. Adams, D. E., White, J., Rumsey, M., and Farrar, C., “Structural Health Monitoring of Wind Turbines: Method and Application to a HAWT”, 2011, Wind Energy, Vol. 14, Issue 4, pp. 603-623.

10. McKay, S., Chaturvedi, A., and Adams, D., E., “A Process for Anticipating and Shaping Adversarial Behavior,” 2011, Naval Research Logistics Journal, Vol. 58, Issue 3, pp. 255-280.

11. Budde, C., Adams, D. E., and Meckl, P., “Impact Detection for a Fiberglass Composite Rotor Blade”, 2010, Journal of the American Helicopter Society.

12. Yang, C., and Adams, D. E., “Predicting Changes in Vibration Behavior With Respect to Multiple Variables Using Empirical Sensitivity Functions”, 2010, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 132(6).

13. Yoder, N. and Adams, D. E., “Vibro-Acoustic Modulation Utilizing a Swept Probing Signal for Robust Crack Detection,” (invited paper) 2010, Structural Health Monitoring: An International Journal, Vol. 9, No. 3, pp. 257-267.

14. McKay, S., Mahulkar, V., and Adams, D., E., “A Process to Comprehend Critical System-of-systems Factors: Applied to Wireless Technology Design on a Navy Ship,” 2009, International Journal of System of Systems Engineering, Vol. 2, No. 4, pp. 257-278.

15. Lopez, J., Adams, D. E., Gomez, J., and Gul, K., “Identification of Damaged Shafts Using Active Sensing – Simulation and Experimentation”, 2009, Journal of Sound and Vibration, Vol. 327, No. 3-5, pp. 368-390.

16. White, J., and Adams, D. E., “Vibration-Based Structural Damage Identification using Active Sensing to Measure Internal Forces that Represent Damage in a Honeycomb Panel”, 2009, Journal of Condition Monitoring and Diagnostic Engineering Management.

17. White, J., Adams, D. E., and Jata, K., “Structural Health Monitoring of a Metallic Sandwich Panel by the Method of Virtual Forces”, 2009, Structural Health Monitoring: An International Journal, Vol. 8, No. 6, pp. 537-553.

18. Yang, C., and Adams, D. E., “Predicting Changes in Vibration Behavior Using First and Second-Order Iterative Embedded Sensitivity functions”, 2009, Journal of Sound and Vibration, Vol. 323, Issues 1-2, pp. 173-193.

19. Mahulkar, V., McKay, S., Adams, D., E., and Chaturvedi, A., “System of Systems Modeling and Simulation of a Ship Environment with Wireless and Intelligent Maintenance Technologies,” 2009, IEEE Transactions on Systems Man & Cybernetics, Part A, Vol. 39, No. 6, pp. 1255-1270.

20. Haroon, M. and Adams, D., E., “A Modified H2 Algorithm for Improved Frequency Response Function and Nonlinear Parameter Estimation,” 2009, Journal of Sound and Vibration, Vol. 320, No. 4-5, pp. 822-837.

21. Adams, D. E., Gothamy, J., Decker, P., and Lamb, D., “Analysis of Passive Vibration Measurement and Data Interrogation Issues in Health Monitoring of a HMMWV Using a Dynamic Simulation Model,” 2009, Society for Automotive Engineers Transactions Journal of Materials & Manufacturing, Vol. 1, No. 1, pp. 235-242.

22. Yoder, N. Haroon, M. Adams, D. E., and Triplett, M., “Multi-Dimensional Sensing for Impact Load and Damage Evaluation in a Carbon Filament Wound Canister,” (invited paper) 2009, Materials Evaluation, Vol. 66, No. 7, pp. 756-763.

23. Stites, S. and Adams, D. E., “Semi-Active Damage Identification for a Composite Structural Missile Component Using Minimal Passive Sensing with Data-Driven Models,” (invited paper) 2009, Intelligent Material Systems and Structures, Vol. 20, No. 3, pp. 337-353.

24. Stites, S. and Adams, D. E., “Minimal-Sensing, Passive Force Identification Techniques for a Composite Structural Missile Component,” 2009, Shock and Vibration, Vol. 16, No. 2, pp. 117-142.

25. Ackers, S. Zwink, B. Adams, D. E., and Evans, R., “Crack Detection in an Embedded Spindle Using Broadband Modal Excitation,” 2008, Experimental Mechanics, Vol. 48, 4, pp. 509-520.

26. Hickey, D., Haroon, M., Worden, K., and Adams, D. E., “Nonlinear System Identification of Automotive Dampers: A Time and Frequency-Domain Analysis,” 2008, Mechanical Systems and Signal Processing, in print.

27. Sundararaman, S. and Adams, D. E., “Modeling Guided Waves for Damage Identification in Isotropic and Orthotropic Plates Using a Local Interaction Simulation Approach,” 2008, American Society of Mechanical Engineering Journal of Vibration and Acoustics, in print, published online, DOI: 10.1115/1.2890389.

28. Sundararaman, S. and Adams, D., E., “Accuracy and Convergence using a Local Simulation Approach in One, Two and Three Dimensions,” 2008, American Society of Mechanical Engineering Journal of Applied Mechanics, Vol. 76, No. 3, pp. 1-10 .

29. Haroon, M. and Adams, D., E., “Component-Level Damage Evolution Laws for Mechanical Damage Prognosis,” 2008, American Society of Mechanical Engineering Journal of Applied Mechanics, Vol. 74(2), DOI: 10.1115/1.2793137.

30. Yang, C., Adams, D. E., Derriso, M., and Gordon, G., “Structural Damage Identification in a Mechanically Attached Metallic Panel Using Embedded Sensitivity Functions”, 2008, Journal of Intelligent Material Systems and Structures, Vol. 19(4), pp. 475-485.

31. Haroon, M., and Adams, D. E., “Component Restoring Force for Damage Identification in Vehicle Suspension Systems”, 2008, International Journal of Vehicle System Modeling and Testing, Vol. 3, No. 1-2, pp. 25-46.

32. Park, J.-I., Bilal, N., and Adams, D. E., “Numerical and Experimental Study of Gas Pulsations in the Suction Manifold of a Multi-Cylinder Automotive Compressor”, 2008, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 130(1), 011014.

33. Yoder, N., Johnson, T., and Adams, D. E., “Near Real-Time Monitoring of Bead Area Damage in Rolling Tires Using a Rotating Wheel Model and Multi-Directional Vibration Data,” 2007, Key Engineering Materials, Vol. 347, pp. 233-238.

34. Kess, H., Sundararaman, S., Shah, C., Adams, D. E., Triplett, M., Walsh, S., and Pergantis, C., “Damage Identification in An S-2 Glass Composite Cylinder Using Vibration and Wave Propagation Methods,” 2007, Journal of Experimental Mechanics, Vol. 47(4), pp. 497-509.

35. Johnson, T., and Adams, D. E., “Rolling Tire Diagnostic Experiments for Identifying Incipient Bead Damage Using Time, Frequency, and Phase-Plane Analysis,” (invited paper), 2006, Society of Automotive Engineers Transactions Journal of Materials & Manufacturing, #2006-01-1621, pp. 984-990.

36. Kess, H. R., and Adams, D. E., “Investigation of Operational and Environmental Variability Effects on Damage Detection Algorithms in a Woven Composite Plate,” 2007, Mechanical Systems and Signal Processing, Vol. 21, No. 6, pp. 2394-2405.

37. Johnson, T. J., and Adams, D. E., “Composite Indices Applied to Vibration Data in Rolling Tires to Detect Bead Area Damage,” 2007, Mechanical Systems and Signal Processing, Vol. 21(5), pp. 2161-2184.

38. Haroon, M., and Adams, D. E., “Time and Frequency Domain Nonlinear System Characterization for Mechanical Fault Identification”, 2007 (invited paper), Nonlinear Dynamics, Vol. 50(3), pp.387-408.

39. Park, J.-I., Bilal, N., Adams, D. E., Bayyouk, J., and Ichikawa, Y., “Gas Pulsation Reductions in A Multi-Cylinder Compressor Suction Manifold Using Valve-to-Valve Mass Flow Rate Phase Shifts”, 2007, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 129(4), pp. 406-416.

40. Hickey, D., Haroon, M., Adams, D. E., and Worden, K., “Investigating Non-Linear Behaviour within a Vehicle Suspension System Using Time and Frequency Domain Techniques,” 2006, Applied Mechanics and Materials, Vols. 5-6, pp. 285-294.

41. Jiang, H., Adams, D. E., and Jata, K., “Material Damage Modeling and Detection in Homogeneous Sheet and Sandwich Panel Using Passive Acoustic Transmission”, 2006, Structural Health Monitoring, An International Journal, v. 5, pp. 373-387.

42. Cardi, A., Adams, D. E., and Walsh, S., “Ceramic Body Armor High-Velocity Impact Load Identification Acceleration Response Mapping”, 2006, Structural Health Monitoring, An International Journal, v. 5, pp. 355-372.

43. Johnson, T. J., Manning, R., Adams, D. E., Sterkenburg, R., and Jata, K., “Vibration-Based Diagnostics of Tool-Part Interactions during Riveting on an Aluminum Aircraft Fuselage”, 2006, Journal of Aircraft, v. 43, n. 3, pp. 779-786.

44. Hundhausen, R. J., Adams, and D. E., Derriso, “Impact Loads Identification in Standoff Thermal Protection System Panels”, 2007, Journal of Intelligent Material Systems & Structures, Vol. 18, No. 6, pp. 531-541 .

45. Yang, C., Adams, D. E. and Ciray, S., “Embedded Sensitivity Functions for Experimentally Diagnosing Vibration Problems and Identifying Nonlinear Models of Automotive Components”, (invited), 2005-01-1502, Society of Automotive Engineers 2005 Transactions: Journal of Passenger Cars – Mechanical Systems, Vol. 114-6, pp. 1853-1863.

46. Yang, C., Adams, D. E., and Ciray, S., “Identification of Nonlinear Systems Using Embedded Sensitivity Functions”, 2005, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 127(6), pp. 530-541 .

47. Yang, C. and Adams, D. E., “Structural Damage Detection for Metal Panel Using Embedded Sensitivity Functions,” June 2005, Journal of Korean Society of Noise and Vibration Engineering, Vol. 15-6, pp. 697-705.

48. Sundararaman, S., Adams, D. E., and Rigas, E., “Biologically Inspired Structural Diagnostics through Beamforming with Phased Transducer Arrays”, 2005, International Journal of Engineering Science, vol. 43, pp. 756-778.

49. Sundararaman, S., Adams, D. E., and Rigas, E., “Structural Damage Identification in Homogeneous and Heterogeneous Structures Using Beamforming”, 2005, Structural Health Monitoring, An International Journal, Vol. 4, No. 2, pp. 171-190.

50. Nataraju, M., Adams, D. E. and Rigas, E., “Nonlinear Dynamics Simulation and Observations of Damage Evolution in a Cantilevered Beam”, 2005, Structural Health Monitoring, An International Journal, Vol. 4, pp. 259-282.

51. Haroon, M., Adams, D. E., Luk, Y.-W., and Ferri, A., “A Time and Frequency Domain Approach for Identifying Nonlinear Mechanical System Models in the Absence of an Input Measurement”, 2005, Journal of Sound and Vibration, Vol. 283, pp. 1137-1155.

52. Johnson, T. J., Yang, C., Adams, D. E., and Ciray, S., “Embedded Sensitivity Functions for Identifying Damage in Structural Systems”, 2004 (invited paper), Journal of Smart Materials and Structures, Vol. 14. pp. 155-169.

53. Kess, H., Bilal, N. and Adams, D. E., “Reversing the Roles of Theory and Experiment in a Roving Laboratory for Undergraduate Students in Mechanical Vibrations”, 2004, International Journal of Engineering Education, Vol. 21, No. 1.

54. Haroon, M., Adams, D. E., and Luk, Y.-W., “A Technique for Estimating Linear Parameters Using Nonlinear Restoring Force Extraction in the Absence of an Input Measurement”, 2005, American Society of Mechanical Engineering Journal of Vibration and Acoustics, vol. 127, pp. 483-492.

55. McGee, C. G., Haroon, M., Adams, D. E., Luk, Y.-W., “A Frequency Domain Technique for Characterizing Nonlinearities in a Tire-Vehicle Suspension System”, 2004, American Society of Mechanical Engineering Journal of Vibration and Acoustics.

56. Jellison, B. J., Kess, H., and Adams, D. E., and Nelson, D., “Nondestructive Evaluation of Parts with Degenerate Modes using Pseudorepeated Roots”, 2004, American Society of Mechanical Engineering Journal of Dynamic Systems, Measurement and Control, Vol. 126, pp. 498-508.

57. Park, J.-I., Adams, D. E., Bayyouk, J., and Ichikawa, Y., “Frequency Response of Pressure Pulsations and Source Identification in a Suction Manifold”, 2004, Journal of Sound and Vibration, vol. 277, pp. 669-690 .

58. Purekar, A. S., Pines, D. J., Sundararaman, S., and Adams, D. E., “Directional Piezoelectric Phased Array Filters for Detecting Damage in Isotropic Plates,” 2004, Journal of Smart Materials and Structures, Vol. 13, pp. 838-850.

59. Yang, C., Adams, D. E., Yoo, S., and Kim, H.-J., “An Embedded Sensitivity Approach for Diagnosing System-Level Vibration Problems”, 2004, Journal of Sound and Vibration, Vol. 269, 22, pp. 1063-1081.

60. Johnson, T. J., Brown, R. L., Adams, D. E., and Schiefer, M., “Distributed Structural Health Monitoring with a Smart Sensor Array”, 2003, Mechanical Systems and Signal Processing, Vol. 18, 3, pp. 555-572.

61. Nataraju, M., and Adams, D. E., “A Nonlinear Dynamical Systems Framework for Structural Diagnosis and Prognosis”, 2002, International Journal of Engineering Science, Vol. 40, pp. 1919-1941.

62. Adams, D. E. and C. R. Farrar, “Identifying Linear and Nonlinear Damage Using Frequency Domain ARX Models”, 2002, Structural Health Monitoring, An International Journal, Vol. 1, No. 2, pp. 185-201.

63. Johnson, T. J. and Adams, D. E., “Dynamic Transmissibility as a Differential Indicator of Structural Damage”, 2002, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 124, No. 4, pp. 634-641.

64. McGee, C. G. and Adams, D. E., “Multiple Equilibria and their Effects on Impact Damage in an Air-Handling Assembly”, January 2002, Nonlinear Dynamics, Vol. 27, 1, pp. 55-68.

65. Brown, R. L., and Adams, D. E., “Equilibrium Point Damage Prognosis Models for Structural Dynamic Systems”, 2003 (invited paper), Journal of Sound and Vibration, special issue for India-USA Conference on Emerging Trends in Noise and Vibration Engineering, Vol. 262, No. 3, pp. 591-611.

66. Adams, D. E., “Frequency Domain ARX Models and Multi-Harmonic FRFs for Nonlinear Dynamic Systems”, 2002, Journal of Sound and Vibration, Vol. 250, No. 5, pp. 935-950.

67. Adams, D. E. and Allemang, R. J., “Discrete Frequency Models: A New Approach to Temporal Analysis”, 2001, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 123, pp. 98-103.

68. Adams, D. E. and Allemang, R. J., “A Frequency Domain Method for Estimating the Parameters of a Nonlinear Structural Dynamic Model through Feedback”, 2000, Mechanical Systems and Signal Processing, Vol. 14, No. 4, pp. 637-656.

69. Adams, D. E. and Allemang, R. J., “Residual Frequency Autocorrelation as an Indicator of Nonlinearity”, 2000, International Journal of Non-Linear Mechanics, Vol. 36, pp. 1197-1211.

70. Adams, D. E., Allemang, R. J., Philips, A. W., and Wynn, R. H., “Spatial Truncation in Models of Nonlinear Structural Dynamic Systems”, 2000, Journal of Sound and Vibration, Vol. 237, No. 1, pp. 145-161.

71. Adams, D. E. and Allemang, R. J., “A New Derivation of the Frequency Response Function Matrix for Nonlinear Vibrating Systems”, 1999, Journal of Sound and Vibration, Vol. 227, No. 5, pp. 1083-1108.

72. Adams, D. E. and Allemang, R. J., “Characterization of Nonlinear Vibrating Systems Using Internal Feedback and Frequency Response Modulation”, 1999, American Society of Mechanical Engineering Journal of Vibration and Acoustics, Vol. 121, No. 4, pp. 495-500. 2.

Refereed Conference Proceedings

1. Watson, C., Rhoads, J., and Adams, D. E., “Structural Dynamic Imaging through Interfaces using Piezoelectric Actuation and Laser Vibrometry for Diagnosing the Mechanical Properties of Composite Materials,” 2013, Proceedings of the ASME Dynamic Systems & Control Conference, Stanford, CA, accepted.

2. Yang, C., Adams, D. E., Lee, T. W., and Chang, Y. B., “Performance Evaluation of an Optimization-Based Damage Detection Technique,” June 2013, 15th Asia Pacific Vibration Conference, Jeju, Korea, submitted for review.

3. Dana, S., and Adams, D. E., “Dynamics-Based Health Monitoring of Wind Turbine Rotor Blades using Integrated Inertial Sensors,” Proceedings of the International Design Engineering Technical Conferences & Computers and Information in Engineering Conferences, IDETC/CIE 2012, August 12-15, Chicago, IL.

4. A. Crandall, B. Hylton, and D. Adams "Compensation For Boundary Condition Effects of a Helicopter Blade Droop Stop Using Frequency Domain Impedance Modeling." Proceedings of the 2012 Vibration Institute Training Conference, Williamsburg, VA, 2012.

5. Yang, C., and Adams, D. E., “Identification of Multiple Damages in a Structure Using Embedded Sensitivity Functions and Optimization Techniques”, 2011, Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Denver, Colorado.

6. Yang, C., and Adams, D. E., “Prediction of Changes in System Vibration Response Using Empirical Sensitivity Functions”, 2010, Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, Canada.

7. Yutzy, J. Bruns, C., Yoder, N., Adams, D. E., Gul, K. and Calhoun, K., “Detection of Precursors to Component Failure in a Spur Gear Drive-Train by Means of a Torque Transducer,” 2010, Proceedings of the Annual Conference of the Prognostics and Health Management Society, Portland, OR.

8. Yutzy, J. Dana, S., and Adams, D. E., “Model Identification and Operating Load Characterization for a Small Horizontal Axis Wind Turbine Rotor using Integrated Blade Sensors,” 2010, Proceedings of the Dynamic Systems and Control Conference, Boston, MA.

9. Mahulkar, V. and Adams, D. E., “Minimization of Degradation through Prognosis Based Control for a Damaged Aircraft Actuator,” 2009, Proceedings of the Dynamic Systems and Control Conference, Hollywood, CA.

10. Gul, K. and Adams, D. E., “Reducing Torsional Vibration in an Engine Cold-Test Cell for Improved Structural Reliability and Engine Assembly Defect Diagnostics,” 2009, Proceedings of the Dynamic Systems and Control Conference, Hollywood, CA.

11. DiPetta, T., Adams, D. E., Koester, D., Gothamy, J., Decker, P., and Lamb, D., “Health Monitoring for Condition-Based Maintenance of a HMMWV using an Instrumented Diagnostic Cleat,” 2009, Proceedings of the 2009 Congress of the Society for Automotive Engineers.

12. Gul, K.,, and Adams, D. E., “Modeling and Excitation Torque Estimation of an Engine Cold-Test Stand for Evaluating Driveline Design and Fault Diagnostics,” 2007, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Seattle, WA, IMECE2007-43255 (compact disc).

13. White, J., Sundararaman, S., and Adams, D. E., “Design of Experiment Issues in Material Component Damage Detection Including Sensor Mass and Footprint Studies,” 2007, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Seattle, WA IMECE2007-41538 (compact disc).

14. Gul, K., and Adams, D. E., “Modeling and Torsional Vibration Analysis of Engine Cold-Test Stand Drivelines,” 2007, American Society of Mechanical Engineers International Design Engineering Technical Conferences, Las Vegas, NV, DETC2007-35647 (compact disc).

15. White, J., Ellmer, C., and Adams, D. E., “Design and Operation of a Vibration-Acoustic-Thermal Apparatus for Identifying Variations in Free and Forced Response of Sandwich Panels Due to Combined Loading,” 2006, Proceedings of the 9th International Symposium on Multiscale and Functionally Graded Materials, Honolulu, Hawaii, FGM Serial No. 6-2-3.

16. White, J., Ellmer, C., and Adams, D. E., “Health Monitoring for Reliability Testing of Metallic Sandwich Panels Using Integrated Active Sensing with Dual Actuator-Sensor Pairs and the Method of Virtual Forces to Identify Thermal and Impact Damage,” 2006, Proceedings of the 9th International Symposium on Multiscale and Functionally Graded Materials, Honolulu, Hawaii, FGM Serial No. 6-2-4.

17. Gul, K.,, and Adams, D. E., “Modeling and Simulation of a Cold-Engine Test Driveline for Production Diagnostics with Experimental Comparisons,” 2006, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Chicago, IL, IMECE 2006-15313 (compact disc).

18. Mahulkar, V. Adams, D. E., Lin, L., Shroff, N., and Chaturvedi, A., “Modeling and Simulation of Ship System of Systems with Wireless Network Inserted for On-Ship Communications,” 2006, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Chicago, IL, IMECE 2006-13906 (compact disc).

19. Joshua, R. and Adams, D. E., “Experimental Identification of Linear and Nonlinear Characteristics of a Foam Aircraft Model for Morphing Applications,” 2006, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Chicago, IL, IMECE 2006-14116 (compact disc).

20. Haroon, M. and Adams, D. E., “Active and Event Driven Passive Mechanical Fault Identification in Ground Vehicle Systems”, 2005, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Orlando, FL, IMECE2005-80582 (compact disc).

 21. White, J. Adams, D. E., Jata, K., “Modeling and Material Damage Identification of A Sandwich Metallic Panel Using MDOF Modal Parameter Estimation and the Method of Virtual Forces”, 2005, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Orlando, FL IMECE2005-80472 (compact disc).

22. Sundararaman, S., Adams, D. E., and Jata, K., “Identification of Propagating Elastic Waves and Incipient Damage in a Friction Stir Welded Al-Li Plate for Cryogenic Tank Applications,” 2005, Proceedings of TMS (The Minerals, Metals & Materials Society), Symposium on Materials Damage Prognosis, New Orleans, LA, pg. 269-278 (invited paper).

23. Adams, D., Smith, M., Chaturvedi, A., Rotea, M., Hoffmann, C., Craig, B., Venkatasubramanian, V., Mahmassani, H., Pines, D., Meliopoulos, S., Busemeyer, J., “Integrated Prognostic System of Systems Health Management” 2005, Proceedings of TMS (The Minerals, Metals & Materials Society), Symposium on Materials Damage Prognosis, New Orleans, LA, pg. 11-21 (invited paper).

24. Haroon, M., Adams, D. E. and Luk, Y.W., “A Technique for Estimating Linear Parameters of an Automotive Suspension System Using Nonlinear Restoring Force Extraction”, 2004, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Anaheim, CA (compact disc).

25. Haroon, M., Adams, D. E., Luk, Y.W., and Ferri, A. A., “A Time-Frequency Approach for Identifying Non-Linear Mechanical System Models in the Absence of an Input Measurement”, 2004, American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Anaheim, CA (compact disc).

26. Park, J.-I., Adams, D. E., Bayyouk, J., and Ichikawa, Y., “Investigation of the Mass Flow Sources in a Multi-Cylinder Compressor Using Frequency Response of Pressure Pulsations in the Suction Manifold”, 2003, Proceedings of the American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Vol. 72, No. 2, pp. 1115-1121.

27. Park, J.-I., Adams, D. E., Bayyouk, J., and Ichikawa, Y., “Simulation Techniques for Predicting Mutli-Cylinder Compressor Suction Pulsations”, 2004, Proceedings of the Society of Automotive Engineers Annual Conference, SP-1859, 2004-01-0911, pg. 7.

 28. Kess, H., Bilal, N. and Adams, D. E., “Development of a Roving Laboratory for Undergraduate Engineering Students in Vibrations”, 2003, Proceedings of the American Society of Engineering Education Annual Congress and Exposition, session 1368 (compact disc).

29. Jellison, B. J., Kess, H., and Adams, D. E., and Nelson, D., “Vibration-Based Nondestructive Evaluation of Asymmetries in Manufactured Parts with Degeneracies”, 2002, Proceedings of the American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, Vol. 71, pp. 621-628.

30. Adams, D. E., “Nonlinear Mechanical Design for Control – Deploying Nonlinearity for Useful Purposes”, 2001, Proceedings of the American Society of Mechanical Engineers Design Engineering Technical Conference on Mechanical Vibration and Noise, Vol. 6C, pp. 2871-2877.

31. McGee, C. G. and Adams, D. E., “Simulating and Detecting A Vibration-Induced Failure in An Air Handling Assembly”, 2001, Proceedings of the American Society of Mechanical Engineers Design Engineering Technical Conference on Mechanical Vibration and Noise, Vol. 6B, pp. 1707-1711.

32. Adams, D.E. and Bono, R. W., “Structural Diagnostics Using Nonlinear Analysis (sDNA) with ‘Smart’ Sensor Arrays”, 2001, Proceedings of the American Society of Mechanical Engineers Design Engineering Technical Conference on Mechanical Vibration and Noise, Vol. 6B, pp. 1985-1990. 3.

Other Conference Proceedings

1. Bond, R., Underwood, S., Adams, D., and Cummins, J., “Structural Health Monitoring-Based Methodologies for Managing Uncertainty in Aircraft Structural Life Assessment,” 2013, Proceedings of the 9th International Workshop on Structural Health Monitoring, Palo Alto, CA, to be presented.

2. Dittman, E. and Adams, D., “Detection and Quantification of a Disbonded Aluminum Honeycomb Panel using Nonlinear Superharmonic Frequencies,” 2013, Proceedings of the 9th International Workshop on Structural Health Monitoring, Palo Alto, CA, to be presented.

3. Kim, S., Adams, D. E., Sohn, H., Rodriguez Rivera, G., Vitek, J., Carr, S., and Grama, A., “Validation of Vibro-Acoustic Modulation of wind turbine blades for structural health monitoring using operational vibration as a pumping signal,” 2013, Proceedings of the 9th International Workshop on Structural Health Monitoring, Palo Alto, CA, to be presented.

4. Hylton, B., A. Crandall, D. Koester, B. Bouquillon, P. Meckl, and D.E. Adams, "Helicopter Rotor Blade Impact Detection and Characterization: Formulation and Application of a Data-Driven Model for the Operational Environment," 2013, Proceedings of the AHS International 69th Annual Forum, Phoenix, AZ.

5. Sharp, N., Adams, D. E., Caruthers, J., O’Regan, P., David, A., and Suchomel, M., “Lithium-ion Battery Electrode Inspection using Flash Thermography,” June 2013, Symposium on Experimental Methods for Advanced Energy Materials, Annual Meeting of the Society for Experimental Mechanics, Lombard, IL.

6. Myrent, N., Kusnick, J., Adams, D. E., and Griffith, D., “Pitch Error and Shear Web Disbond Detection on Wind Turbine Blades for Offshore Structural Health and Prognostics Management,” April 2013, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

7. Kim, S., Adams, D. E., and Sohn, H., “Crack Detection on Wind Turbine Blades in an Operating Environment using Vibro-Acoustic Modulation Technique,” 2012, Annual Review of Progress in Quantitative Nondestructive Evaluation, Denver, CO.

8. Sharp, N., Masatoshi, M., and Adams, D., “Pulse Thermography for Quantitative Nondestructive Evaluation of Sound, De- and Re-mineralized Enamel,” 2012, Health Monitoring of Structural and Biological Systems, San Diego, CA, Edited by Kundu, Tribikram, Proceedings of SPIE.

9. Underwood, S., and Adams, D., “Modeling of Subsurface Damage in Sandwich Composites using Measured Localized Nonlinearities,” 2012, Proceedings of the International Modal Analysis Conference, Jacksonville, FL.

10. Kusnick, J., and Adams, D., “Vertical Axis Wind Turbine Operational Modal Analysis in Sheared Wind Flow,” 2012, Proceedings of the International Modal Analysis Conference, Jacksonville, FL.

11. Jaques, J., and Adams, D., “Padding Dynamic Stiffness using Impedance Modeling of Helmet-Head System,” 2012, Proceedings of the International Modal Analysis Conference, Jacksonville, FL.

12. Jaques, J., and Adams, D., “Using Impact Modulation to Detect Loose Bolts in a Satellite,” 2012, Proceedings of the International Modal Analysis Conference, Jacksonville, FL.

13. Butner, C., and Adams, D., “Simplified Nonlinear Modeling Approach for a Bolted Interface Test Fixture,” 2012, Proceedings of the International Modal Analysis Conference, Jacksonville, FL.